Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Iso mesh on uneven surface 1

Status
Not open for further replies.
Replies continue below

Recommended for you

Try using the "Paver" or "Hybrid" mesh option and create a quad mesh on that surface. Then, you should be able to generate the desired Hex mesh by sweeping the quad elements.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor