ISO Tolerances 2

[jovo14]

Where can I find a complete listing of the ISO shaft and bore tolerance designations (such as H7, p9, etc)?

 

[1960]

There are many catalogs which have these ISO tol.<br>
Begin with INA bearings, Stockdrive, all bearing companies.<br>
The mechanical handbook has the tolerances. <br>
<br>
Happy hunting.

 

[SAP]

The ISO standard number is 286. This ISO standard has also been adopted by Australian standards as AS1654.1 and AS1654.2 which can be purchased online at

http://www.standards.com.au

 

[mlt6ba]

Try going to

http://www.kok.com/

We are currently using this program on each of our engineers computers. It's a great program.

 

[furia]

I need ISO shaft and bore tolerance designations (such as H7, p9, etc)?

 

[ORTZ]

Try to to

http://www.lightspan.com

 

[diamondjim]

You can find part of the answer in Machineries Handbook
for the H7 portion, I have an old Handbook and it does
not list the p9 tolerances. I do have a standard at work
and would be glad to fax it to you. I believe it is a
din standard. The capital letters apply to the bores
and the small letters apply to the shaft.
email j.geisey@juno.com

 

ISO standard 2768-mk what does the the mk stand for