rica
Military
- May 9, 2003
- 2
I need to locate or design a very small isolated DC/DC converter for a military application that has the following general requirements:
Input: +5VDC +/- 5%, 36mA max.
Output: +12VDC +/-25%, 7mA min. at 9V (63mW)
Isolation: >500VDC min.
Max Height: 0.095"
Max Lenght: 0.325"
Max Width: 0.400"
Temp Range: -40C to +85C (+110C desired)
Schedule: Very Urgent
We use Burr Brown (TI) series DCV01, DCR01, and DCP02 isolated 1W and 2W converters on many projects. However, none of these devices will meet this application's requirements due to a very small item that will house this circuit. We have an in-house hybrid circuit design and fabrication capability that can be used to implement a custom circuit if nothing COTS can be located.
We will appreciate any sugestions and guidance on this subject.
Input: +5VDC +/- 5%, 36mA max.
Output: +12VDC +/-25%, 7mA min. at 9V (63mW)
Isolation: >500VDC min.
Max Height: 0.095"
Max Lenght: 0.325"
Max Width: 0.400"
Temp Range: -40C to +85C (+110C desired)
Schedule: Very Urgent
We use Burr Brown (TI) series DCV01, DCR01, and DCP02 isolated 1W and 2W converters on many projects. However, none of these devices will meet this application's requirements due to a very small item that will house this circuit. We have an in-house hybrid circuit design and fabrication capability that can be used to implement a custom circuit if nothing COTS can be located.
We will appreciate any sugestions and guidance on this subject.