Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

J1939 to Ethernet

Status
Not open for further replies.
TugboatEng

TugboatEng

Marine/Ocean
Nov 1, 2015
11,798
I'm interested in importing data from SAE J1939 into a PLC via ethernet. I'm guessing that would be a CAN ISO 11898-2 to Ethernet gateway. Most systems I have seen communicate via RS232 which is a serial connection. I don't like that a single component issue takes out the whole loop and would prefer to use an Ethernet connection. Does anybody have any recommended gatways for this? Google doesn't turn up many options and I would prefer to use a trusted supplier like Mouser or Digikey.
 
Status
Not open for further replies.

Similar threads

TugboatEng
  • Locked
  • Question
Combining J1939 Data
Replies
1
Views
700
MadisonCameron
MadisonCameron
3DDave
  • Locked
  • Question
Are brake lights required? Maybe Hyundai points to FMVSS and says - not so fast.
Replies
6
Views
917
BrianPetersen
BrianPetersen
rQuestionEngineering
  • Locked
  • Question
Where to conveniently locate the sensor line yellow wire without taking out the meter set?
Replies
0
Views
624
rQuestionEngineering
rQuestionEngineering
RRiver
  • Locked
  • Question
I need to test mixing J1850 and J19
Replies
4
Views
368
RRiver
RRiver
Philo9100
  • Locked
  • Question
Will applying multiple force sensors to weight a object defect sersor's precision?
Replies
2
Views
223
BrianE22
BrianE22

Part and Inventory Search

Sponsor

Back
Top Bottom