hp22
Chemical
- Jul 1, 2006
- 7
Can anyone help me with cooling jacket design for an atomspheric agitated tank?
Tank size: 46"(dia)x96" height
capacity: 2500 liters
Material of construction: SS316
Shell thickness: 8mm
Tank content: 2000 liters of dilute NaOH solution (0.05 kg/cubic meter)at 80 deg C
Tank agitated by turbine mixer inserted off center from top.
Cooling Fluid: Water at 8 deg C
Batch process, Content to be cooled to 60 deg C in about 30 minutes.
I need to calculate surface area required for cooling, cooling water flow rate.
I need to specify how heat transfer coefficient is arrived in addition to formulae used for every calculation.
Please help...
Tank size: 46"(dia)x96" height
capacity: 2500 liters
Material of construction: SS316
Shell thickness: 8mm
Tank content: 2000 liters of dilute NaOH solution (0.05 kg/cubic meter)at 80 deg C
Tank agitated by turbine mixer inserted off center from top.
Cooling Fluid: Water at 8 deg C
Batch process, Content to be cooled to 60 deg C in about 30 minutes.
I need to calculate surface area required for cooling, cooling water flow rate.
I need to specify how heat transfer coefficient is arrived in addition to formulae used for every calculation.
Please help...