Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Kinematic analysis of suspension linkage

Status
Not open for further replies.

David_Yu

Student
Apr 9, 2021
1
I got a problem in finding the result of velocity vs distance in my case study. In my case, the vehicle is travelling at constant velocity of 15m/s and go through a bump profile of z = a*sin(2*pi*x/L).
1_xhl9gp.png


How should I going to define my input motion in ADAMS?
I really need helps. Thanks in advance
 
Replies continue below

Recommended for you

Look at 2d_poly.rdf and see if you can figure out the syntax. It isn't hard. Or, use the road profile builder in Car.


Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor