Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Labor Standards 2

Status
Not open for further replies.

HDGlide

Petroleum
Mar 31, 2009
13
Hey Guys! I'm trying to find industry standard labor hours. I've heard of the Gulf States or Gulf Coast Standards but I've searched and searched and can't find anything. I'm looking for something centered around Pressure Vessels. Any help or suggestions would be greatly appreciated!

Thanks,
Walt
 
Replies continue below

Recommended for you

I attached an interesting publication from the magazine "The FABRICATOR".

This is not centered on Pressure Vessels, but may be helpful.

I would appreciate if someone could send something related to pressure vessels or boilers.

Regards,

Rogério.

 
Thanks in advance RR79! I will review the documents and let you know.

Walt
 
Maybe it is a bit late. But I also want to point you to Page norms.

In the Netherlands the DACE (Dutch Association of Cost Engineers) has published several booklets with norms and a price booklet which can be found on the DACE website. Saddly for you these are only in Dutch. The CD rom is in English with Envglish pe-ambles

 
Thanks Leendert, I'll be sure to look into that.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor