Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Large Dish Fabrication

Status
Not open for further replies.
Huzefa Taheri

Huzefa Taheri

Mechanical
Jun 23, 2023
1
How should we determine the weld joints (number of joints and orientation of joints) of a dish?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Discuss with your fabricator. Will generally depend on their equipment and capabilities.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AspenMech
  • Question
pickling/passivation after fabrication completed 1
Replies
2
Views
1K
mfgenggear
mfgenggear
MJCronin
  • Locked
  • Question
Quality Air Reciever Fabrication and Welding --
Replies
5
Views
1K
SnTMan
SnTMan
AM424
  • Question
Steam Accumulator Large Quantity Blowdown Advice
Replies
1
Views
2K
FacEngrPE
FacEngrPE
Karthik P
  • Locked
  • Question
How to determine dish end height(h) as per ASME Code
Replies
3
Views
815
Karthik P
Karthik P
RadiateurFou
  • Locked
  • Question
Can old Appendix 1-10 still be used for large openings? 2
Replies
17
Views
425
jt1234
jt1234

Part and Inventory Search

Sponsor

Back
Top Bottom