I am looking for manufacturers of stormwater pumps capable of pumping at 67,500 gpm each (2 total). I have information from MWI and I need to contact other manufacturers. Does anyone know of another pump manufacturer who builds stormwater pumps this size?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Large Stormwater Hydraulic Pump Manufacturers
- Thread starter shirsch
- Start date
shirsch,
You may want to manifold several pumps as opposed to using one 67,500 if possible.
You could run a triplex or quadplex station and possibly save money in operating costs, as you would sometimes have only one pump running.
The largest Flygt pump I could find in the catalogue is the LL 3602, 565 HP, duty point at about 30,000 gpm at 45 feet of head.
You may want to manifold several pumps as opposed to using one 67,500 if possible.
You could run a triplex or quadplex station and possibly save money in operating costs, as you would sometimes have only one pump running.
The largest Flygt pump I could find in the catalogue is the LL 3602, 565 HP, duty point at about 30,000 gpm at 45 feet of head.
dicksewerrat
Civil/Environmental
Can you use an axial flow pump? How high re you lifting?
Richard A. Cornelius, P.E.
Richard A. Cornelius, P.E.
- Thread starter
- #5
dicksewerrat
Civil/Environmental
Flygt makes some and there are some others. Call New Orleans to find out what pumps they use. They have some.
Richard A. Cornelius, P.E.
Richard A. Cornelius, P.E.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question