Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Laundry wastewater surfactant reduction

Status
Not open for further replies.

tungnihsif

Structural
Mar 18, 2008
2
Can any tell me how to reduce the surfactants from a laundry waste stream. The FDEP has a contamination limit at 2 mg/l as a residual in the soil. The treatment process now is aeration and filtration and the concentration runs between 250-500. The wastewater is disposed in a typical subsurface drainfield. Am I wrong in arguing that the detergents are biodegradable. I am testing an additive (basically grease) and seeing some reduction (50%). Maybe just increase the dose? Seems kind of odd to add grease to waste water but what the heck. Any help would be appreciated.
 
Replies continue below

Recommended for you

The typical activated sludge process will remove the surfactants. The surfactants are biodegradeable.

Aeration alone is not going to do much.

Investigate the intallation cost of a package treatment plant.
 
Are there small package "off the shelf" options for activated sludge treatment? This plant sees 8000 gpd max.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor