Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Level Indicator

Status
Not open for further replies.

sameermhatre1989

Mechanical
Jul 18, 2016
1
0
0
IN
Please suggest best level indicator on storage tank
Application are Solvent + along with sticky material.
Solvent are methanol, Ethyl Acetate,SPDS.
Primary Purpose is avoid overflow of tank

 
Replies continue below

Recommended for you

Roydm, Am assuming the OP has used the word "level indicator" to mean a transmitter, since he is wanting to enable an inlet line shutdown on LAHH with this device.
 
We'll probably never know since he hasn't been back.

While I agree radar is a good choice for level I still prefer a bottom mounted DP cell for reliability perhaps with a backup level switch.
Cheers
Roy
 
what you need is LIT, Level Indicator Transmiter, in order to trasmit the signal to the control room asociated to an interlock to stop the flow of entrance of the tank controlling a valve, or stop a pump, depending of your system configuration.
a level indicator do not perform any action to stop the filling of the tank, the level indicator only shows the level of the tank in your control room (depending if it is in field or control room)
 
Status
Not open for further replies.
Back
Top