library in NX 7 1

[Hemant65]

Hi..

Can anybody tell me how i can get library for standard components(like Pipe, Falnge, Weldolet, Sockolet, Structural items like Channel, Beams, Angles etc.,) as per various ASME code? Like ASME B16.5,MSS SP 44, MSS SP 97, ASME B16.9, ASME B16.20 & B16.21 etc.,

Thanks,
Hemant

 

[JohnRBaker]

Libraries of pipe and conduit fittings, electrical connectors, etc. are supplied with the purchase of the various Routing modules.

http://www.plm.automation.siemens.com/en_us/products/nx/design/mechanical/routed.shtml

http://www.plm.automation.siemens.com/en_us/Images/4181_tcm1023-47161.pdf

As for standard mechanical components such as fasteners, bearings, rolled structural shapes, etc., these are included in our Reuse Libraries which can be found on the GTAC product download site. All you'll need is you 'webkey' ID and password. I would recommend that if you do decide to look into the Reuse Libraries that you first download the spreadsheet that you will find at the GTAC site which describes the various libraries and their content since it's generally not practical to download all of them.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[Hemant65]

Hai John..

Thanks for your response.

Can you pleas tell me how i can get WebKey Username & WebKey Password?

Also can you please send me spreadsheet of reuse libraries?

Hemant Solanki

 

[JohnRBaker]

Just contact GTAC and they can set it up.

http://support.ugs.com/gtac.shtml

Note that when you get your WebKey ID/Password you can download not only the spreadsheet, but also the installation instructions, a 'White Paper' covering how you can add your own company specific parts to the library as well as the individual libraries themselves.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.