Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lightning rods on tower cranes 1

Status
Not open for further replies.

larrytoks

Electrical
Apr 3, 2010
2
Pls guys, i want to know the standard for installing lightning rods on tower cranes and the maximum radius a particular tower crane's lighting rod can cover, i.e if 2 tower cranes are not too far from each other, what must be the minimum dist apart btw the tower cranes such that only one lightning rod is sufficient for the two cranes?
Thanks
 
Replies continue below

Recommended for you

BS 6651 contains some useful recommendations and worked examples, it's an easier document to apply than the later BS 61024.

When asking code questions it's useful to state where you are located, otherwise we'll assume you're in the US where the majority of people who don't state their location seem to originate from. [smile]


----------------------------------
image.php

If we learn from our mistakes I'm getting a great education!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor