Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
Line and grade definition
- Thread starter lpseifert
- Start date
Line = Horizontal Alignment
Grade = Vertical Alignment
Of course, there should also associated items indicating the allowable construction tolerances (ie how much the Contractor can be out without it being "wrong") and how much the Engineer can alter the line and grade in the field without the Contractor being allowed to apply for an extra.
David
David Dietrich
KMK Consultants Ltd
Windsor, Ontario, Canada
Grade = Vertical Alignment
Of course, there should also associated items indicating the allowable construction tolerances (ie how much the Contractor can be out without it being "wrong") and how much the Engineer can alter the line and grade in the field without the Contractor being allowed to apply for an extra.
David
David Dietrich
KMK Consultants Ltd
Windsor, Ontario, Canada
dicksewerrat
Civil/Environmental
ALL SEWERS, STORM OR SANITARY, ALL SIZES SHOULD BE CONSTRUCTED TO LINE AND GRADE AS DESIGNED
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question