Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Line Pressure Drop

Status
Not open for further replies.

wasimshahzad

Mechanical
Mar 19, 2008
1
Dear Fellows need your help. if we have two pumps in series one is delivering at 6-9 bar and on same header i have one pump for an other system which need 2-3 bar suction. one way is to use PCV but i dont have time to as lead time is very long. i want to commission a system. How do i run this pump at 2 bar.
 
Replies continue below

Recommended for you

if you want to run the first pump at a lower rpm to reduce the pressure can you put it on a vfd?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor