Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Line Reactors

Status
Not open for further replies.

PUMPDESIGNER

Mechanical
Sep 30, 2001
582
0
0
US
We need a few line reactors for use on top of VFDs.
We need them in 1-2 weeks, so inventory is important.
40hp and 10hp
480 volt 3 phase

Suggestions for reliable and knowledgeable vendors would be appreciated.

Although we have an electrical engineer he claims to know little, prefers to play with 3 volt chips-n-things, so we need to use vendor's expertise.

Thank you.

PUMPDESIGNER
 
Replies continue below

Recommended for you

Pumpdesigner,
I have also had good luck with MTE.

Also be aware that some drives come are already equipped with line reactors, from what I am told, they also may be called "sine filters"

Best Regards,
Afterhrs

[wavey]
 
Thank you guys very much.
I have worked years past with Trans-Coil, good company.
Will check out the others because we are going to be purchasing them more and more.

PUMPDESIGNER
 
Status
Not open for further replies.
Back
Top