link surface from one part to another in assembly

[TiagoFigueiredo]

Hello,

I'm trying to link a surface from one part to another, in assembly context. The only way that i found to this, is with offset with 0mm value. Is there any other way to do it? Is there any option to create a link of the entire surface?

Thanks.

Tiago Figueiredo
Tooling Engineer

Youtube channel:

https://www.youtube.com/channel/UC1qdlBeJJEgMgpPLVJoOIOw

 

[SBaugh]

Not that I know of. You can only link Sketches and features, not an existing surface, unless as you found offset it.

Scott Baugh, CSWP
CAD Systems Manager
Evapar

http://www.evapar.com

"If it's not broke, Don't fix it!"

faq731-376

 

[TheTick]

What do you mean by "create a link to the entire surface" Sounds like you're already doing it.

 

[Jboggs]

Sounds to me like the very definition of "coincident" - offset at zero distance.

 

[Nxprop]

there is also convert element , it will be always linked.