Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Linking harmonic response to harmonic acoustics

Status
Not open for further replies.

kravkarfu

Mechanical
Aug 24, 2018
1
Hello,

I need to connect (link) harmonic response into harmonic acoustics, however i cannot do that (ansys does not allow me to do so).
I dint find any solution to this problem.

I need to do:
forum_ansys_topic9.jpg
. just link and transfer solution data from Harmonic response (its response of stator on electromagnetic forces from MAxwell2D) to the setup of Harmonic Acoustics in order to calculate SPL (pressure level).

Ansys does not allow me to import nothing in the solution of harmonic acoustics. I have version 2019R3. Everybody can do that, see e.g.:
What can be the problem? I have mechanical enterprise solver available
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor