Logo into drawing titleblock

[freerangequark]

Hi,

I've been through the archives trying to figure out how to bring a logo into the titleblock.

I have tried *.ai *.dxf versions and can't get much more than garbage when I try to bring in the logo.

If someone can help me out here I would greatly appreciate it. I have attached the black and white logo in BMP and AI formats. The conversion to DXF was giving me garbage in Corel.

BTW, I am working in Wildfire 4.0

Thank you,
Glenn

Here are the files.

http://files.engineering.com/getfil...0-a5e6-b65255c927f0&file=motopod_logo_BW_.bmp

http://files.engineering.com/getfil...37-bb2d-d02b74b04ebd&file=motopod_logo_BW_.ai

 

[LawrenceS2]

I have had some experience with working with company formats and the logo we use here (prior to rebranding) was a rather long name with a custom font that was turned into curves and splines. Importing that into Pro|E was a pain. What I ended up doing for the format was re-create the frame for the template (exported the current one as a DXF) in another software that had a decent sketching feature (in my case, DraftSight) where I was able to more easily add and position the logo, then I imported it back to the format and made sure all the rest of the information in the template still lined up appropriately.

Of note: when you do this, make sure that you export as a 2004 or earlier DXF and do the same when you save it in another software. For some reason, WF4 and WF5 cannot handle v2007 DXF files.

 

[freerangequark]

Thanks for the reply Larry. I'll see what I can do.