Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Long term Preservation

Status
Not open for further replies.

shintolawrence

Mechanical
Jun 25, 2018
4
0
0
SA
GUYS, I HAVE SOME DOUBTS PLEASE ADVICE ME,
1.Which lubricant(grease) is suitable for valves(ball,plug,gate) long term preservation in Aramco?
2.Which lubricant(grease) is suitable for Equipment's long term preservation in Aramco?
3.what is corrosion coupon, is this required for preservation?

 
Replies continue below

Recommended for you

1. That will depend on the material the valves are made from and the material and natural elements you are preserving them from (sand, water, sea water, wind, sun, oil, gas, etc.).

2. That will depend on the material the equipment is made from and the material and natural elements you are preserving it from (sand, water, sea water, wind, sun, oil, gas, etc.).

3. A corrosion coupon is a removable strip of material, identical to the system's material (or selected specifically for the system) and placed in a suitable location within the pipeline so it experiences the same exposure as the rest of the system. The coupon is removed for inspection at a specific time in order to take measurements and estimate the total system's corrosion rate from the corrosion rate of the coupon.

What are Corrosion Coupons?

Andrew H.
 
Status
Not open for further replies.
Back
Top