Looking for a CAT5E BRET tester

[mustsurf]

Hello,
I am looking for a device to perform a Bit Rate Error Test of CAT5E network cable over an 8-10 hour period and log the results. These cables are delicate and I need to certify they are still capable of 1Gigabit speeds after installation on our machinery. The cables are not in a building but on a robotic device, so I want to make sure I don’t have any issues as the gantry moves.
Thanks for the help,
Jim

 

[MacGyverS2000]

Google search on CAT5 network cable tester turns up thousands of hits... plenty of equipment out there, usually starting at several thousand $s and going up to around the $100k mark.

Dan - Owner

http://www.Hi-TecDesigns.com

 

[sreid]

Electro Rent.

http://www.electrorent.com/

 

[mustsurf]

Thanks for the responses. I am trying to find something that does data logging for an 8 hr period. So far, the spec sheets I have read are not clear about this so I was hoping someone here was familiar with this equipment and could point me in the right direction.
Thanks,
Jim