looking for deck type nkx-16-16 1

[mauri10]

I am looking for information on a slab made up of 3" stone conc fill over deck type nkx-16-16. Has anyone see load tables, geometry, etc, for that type of slab?

 

[msquared48]

The H. H. Robertson Company put out a steel deck, 24" widths, that were described and rated in an old ICBO report, #1388, and dated November, 1980.

The structural properties are listed on page 22 , Table -1, and the load ratings on Page 17, Table D-3. Page 27 has a sketch of the geometry.

I can scan those three pages and post them here for you later today.

Mike McCann
MMC Engineering
Motto: KISS
Motivation: Don't ask

 

[mauri10]

thank you. yes, i am interested, pls post the info

 

[msquared48]

OK... This will take sevetral posts...

Here is the first page of the report...

Mike McCann
MMC Engineering
Motto: KISS
Motivation: Don't ask

 

[msquared48]

Page 27 with the geometry:

Mike McCann
MMC Engineering
Motto: KISS
Motivation: Don't ask

 

[msquared48]

Page 22 with the structural properties:


Mike McCann
MMC Engineering
Motto: KISS
Motivation: Don't ask

 

[msquared48]

Page 24 with an additional cross section relating to the structural properties table:



Mike McCann
MMC Engineering
Motto: KISS
Motivation: Don't ask

 

[mauri10]

thanks, much appreciated

 

[msquared48]

As for the load tables, of which there are several, it shows for a 2.5" and 3.25" infill for Normal and Lightweight concrete.

I'll post the three pages I have and you will have to choose:

Page 15: 2.5" Normal Weight

Mike McCann
MMC Engineering
Motto: KISS
Motivation: Don't ask

 

[msquared48]

Page 16: 2.5" Lightweight

Mike McCann
MMC Engineering
Motto: KISS
Motivation: Don't ask

 

[msquared48]

Page 17: 3.25" Lightweight

That's it for the applicable load tables.

I also have tables with allowable diaphragm shears here too if you need them. Let me know. I'll have to check back later as I have an appt.

Mike McCann
MMC Engineering
Motto: KISS
Motivation: Don't ask