Looking For Miniature High Pressure Relief Valve

[InTheMorning]

I am trying to locate a high pressure relief valve that can withstand up to 1500-2000psi before breaking. It needs to be no longer than .470" in length and a dia. no greater than .425". Does anyone know of this valve???

 

[whammett]

This might be possible, but not with any relief valve that uses a spring. I've never run across any that small for any pressure even remotely near those pressure specs.


Will Chevron Corp.

 

[hydtools]

Try Lee Company

http://www.theleeco.com/VALVWEB2.NSF/Pressure Products!OpenView

Ted

 

[itascot]

You could try posting this specific question on the Safety Relief Valve engineering (PSV) forum.
Ciao,

 

[JimCasey]

Circle-Seal make small relief valves. They have been known to make specials.

 

[rmw]

Take a look at CPV valves.

http://www.cpvmfg.com/

rmw

 

[hsbcn]

You probably need a custom made valve; try Ocean International, they can help with short run, bar stock valve manufacture.

Heather's focus: Alloy Valves Duplex Valves Super Duplex Valves Monel Valves Inconel Valves [link titanium-valves.com]Titanium Valves[/url] & 6 Moly Valves

 

[InTheMorning]

I ended up designing my own valve for my product and made them in house... I was just hoping for something off-the-shelf so to speak. Thanks for all your input everyone. Much appriciated.

-Ian-


"Science will stagnate if it is made to serve practical goals." (Albert Einstein)

 

[gerhardl]

Have you looked at bursting discs as a solution? If you can accept a relief that does not shut down again this will fit all your parameters, including the commercial side.

See for instance

http://www.fike.com

or others.