I am looking for a typical hook lengths, development lengths for 275, 230 MPa rebars for 20 f'c concrete. Are there any such thing? Like a free development length calculator software I could download? Any recommendations Sir? I am looking for typical values so that I could verify my initial calculations.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Looking for Typical hook, splice, development lengths. Anyone??
- Thread starter keenkeem
- Start date
- Thread starter
- #2
Take ACI and write a spreadsheet
By yourself. That will help you
To understand everything. I am sure
there will be times you need to play around with
Those formulas. By the way,they are not
Difficult at all.
Moment curvature analysis,reinforced concrete column design and prestressed concrete pile design at
By yourself. That will help you
To understand everything. I am sure
there will be times you need to play around with
Those formulas. By the way,they are not
Difficult at all.
Moment curvature analysis,reinforced concrete column design and prestressed concrete pile design at
IsaacStructural
Structural
I agree with the others, you can do the calculation by hand, and using excel make a nice spreadsheet.
If you want a nice chart that someone has already made, these are included in the CRSI design manual, which is a good reference for this sort of thing.
Licensed Structural Engineer and Licensed Professional Engineer (Illinois)
If you want a nice chart that someone has already made, these are included in the CRSI design manual, which is a good reference for this sort of thing.
Licensed Structural Engineer and Licensed Professional Engineer (Illinois)
- Thread starter
- #6
- Status
Similar threads
- Question
- Question