Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

LPG optimisation

Status
Not open for further replies.

malbeare

Automotive
Nov 28, 1999
98
Dear fellow members I would like as much info as possible on the optimising of an SI petrol engine to be specificly tuned to run on only LPG. What is the calourific value of LPG compared to Petrol and what is its octain rating?
Thankyou Malbeare
 
Replies continue below

Recommended for you

I seem to get tasked with answering LPG questions, but before we get too deep, this has been discussed many times, please do a search on this forum.

Franz

eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
I should refine this a bit more.
specificly what is available for small engines in the way of carburettors vapourisers and gas mixers . We are talking about single cylinder 4-stroke 125cc to 250cc air cooled motorbike engines.
Does anyone have any experience in this?
malbeare
 
(From the US perspective)
Not much equipment is available, I'm sad to say. In the US, motorbike conversion to LPG has never had any interest, but in other parts of the world, there is some interest, primarily due to economics, but more recently, emissions. In some third world countries, the motorbike is the dominant form of transportation, most of them are two-cycle with the inherent emissions problems.

As for what equipment, I know of one vapor injection system that works well and dont particularly care for the field installed "kits" that are used in generators and pumping engines (also called "spud kits").
Franz


eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
As Franzh has said there are a lot of small motorbike/moped conversions in the third world mainly using equipment from Italian suppliers I think, certainly BRC supply kits to India. To the best of my knowledge they do not supply any kits in the UK
 
Making a wild guess, mal beare is in oz, not the UK.

Cheers

Greg Locock
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor