Jan 16, 2020 #1 5747hazel Structural Dec 28, 2019 43 Can L pile calculate reinforcing for concrete pile with a circular section? Thanks
Jan 16, 2020 #2 r13 Civil/Environmental Oct 26, 2019 5,988 Lpile will provide compression capacity and moment demand, from that you can calculate the required steel. Upvote 0 Downvote
Lpile will provide compression capacity and moment demand, from that you can calculate the required steel.
Jan 16, 2020 Thread starter #3 5747hazel Structural Dec 28, 2019 43 thanks. what do you use to check or calc the reinforcing for the circular section? Upvote 0 Downvote
Jan 16, 2020 #4 r13 Civil/Environmental Oct 26, 2019 5,988 I used to use PCACol. I don't know if it still available or not. But there are many programs can do that. Upvote 0 Downvote
I used to use PCACol. I don't know if it still available or not. But there are many programs can do that.
Jan 16, 2020 Thread starter #5 5747hazel Structural Dec 28, 2019 43 I think pca col can thanks Upvote 0 Downvote
Jan 16, 2020 Thread starter #6 5747hazel Structural Dec 28, 2019 43 that was what I have been using. I am kind of semi retired. can't believe I forgot pca col. Upvote 0 Downvote
Jan 16, 2020 #7 azcats Structural Oct 17, 1999 693 LPile 2019 will calculate nominal moments for circular RC sections. If you want to do it outside of LPile there are some spreadsheets out there. I've messed with: [ul] [li]'ShortCol' from yakpol.net[/li] [li]'CrossSectionAnalysis_V0403' from Robert Niall at rmniall.com[/li] [/ul] But LPile is my go to anymore. Upvote 0 Downvote
LPile 2019 will calculate nominal moments for circular RC sections. If you want to do it outside of LPile there are some spreadsheets out there. I've messed with: [ul] [li]'ShortCol' from yakpol.net[/li] [li]'CrossSectionAnalysis_V0403' from Robert Niall at rmniall.com[/li] [/ul] But LPile is my go to anymore.
Jan 16, 2020 #8 r13 Civil/Environmental Oct 26, 2019 5,988 If you have access to CRSI handbook, that will help too. Upvote 0 Downvote
