Dec 26, 2022 #1 AbdullahE Mechanical Dec 22, 2022 7 Hi, Is there anyone can advise or guide me how to machine the bearing area highlihted at the attachment file? For detail fuction of the part you can check the video on the yt.Link https://files.engineering.com/getfile.aspx?folder=d30e87ff-d227-4313-8f47-0bad05227e78&file=Railway_Coupler.pdf
Hi, Is there anyone can advise or guide me how to machine the bearing area highlihted at the attachment file? For detail fuction of the part you can check the video on the yt.Link
Dec 26, 2022 #2 3DDave Aerospace May 23, 2013 10,688 That part is U-shape that can be machined and ground the way a crankshaft is machined and ground. Upvote 0 Downvote
Dec 26, 2022 Thread starter #3 AbdullahE Mechanical Dec 22, 2022 7 Is there any guidelines/yt videos for machining thosw kind of parts? I'm struggling with to figure it out pls. Upvote 0 Downvote
Is there any guidelines/yt videos for machining thosw kind of parts? I'm struggling with to figure it out pls.
Dec 26, 2022 #4 3DDave Aerospace May 23, 2013 10,688 Grinding a crankshaft - https://www.youtube.com/watch?v=-7Al0_ihWgs There is probably a dedicated machine for the coupler parts that only makes that surface. Upvote 0 Downvote
Grinding a crankshaft - https://www.youtube.com/watch?v=-7Al0_ihWgs There is probably a dedicated machine for the coupler parts that only makes that surface.
Dec 27, 2022 Thread starter #5 AbdullahE Mechanical Dec 22, 2022 7 Thank you so much for helping me Dave Upvote 0 Downvote
