Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Magnet confusion

Status
Not open for further replies.

megmaltese

Electrical
Nov 5, 2012
12
Hi everybody,

I'll not lie: I joined this forum to see if I could find somebody so kind to help me with a simple question.

In the first picture I have represented the lines of force of a couple of magnets.
One is small, and represented in its entirety, the other one is much larger and only its North pole is represented.

IMG_7391.JPG


So, question n. 1, are the line of force roughly right or not?





Based on the lines of force from the first picture, I have made another picture which shows what the vector power of the magnet should be.

IMG_7392.JPG


The big N of the large magnet is pushing away the North of the small magnet while also pushing it in the South direction (right), while the South of the small magnet is being attracted to it vertically as well as being pulled to the right side.

The overall vector should result first of all in the rotation of the magnet along its axis, AND moving it to the South direction.

My question is: am I right or not?

Thank you in advance for your help!

Marco
 
Replies continue below

Recommended for you

But it will not move in one direction or another, it will only rotate on its axis.

Unless it's actually pivoted, no. There will be rotation, yes, but there will also be translation. It's most like that the free magnet will wind up overhanging the right edge of the fixed magnet. Every termination of a line of force will be subject to attraction, so, even the portion to the right of center will be attracted and will move toward the fixed magnet.

TTFN
faq731-376
7ofakss
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor