making line intersection points visible

[TbayEng]

I'm using Solid Edge V20, i have a part that has a corner which has been rounded. I can dimension to the intersection point of the two lines, but i cannot find a way to display the intersection points. I know NX has the tool, does solid edge have a similar tool for showing intersection points between to lines?

I have attached a picture to show what I mean, it is circled in red.

Sean

 

[KENAT]

I've always added lines in 'draw in view'.

If SE can do it I'd be interested in how too.

Posting guidelines faq731-376

http://eng-tips.com/market.cfm?

(probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484​

 

[Woodyscolts]

hang out over the first line then over the second then get close to where the intersection should be and SE will find the intersection point.

 

[KENAT]

Find it yeah, but not indicate it which is sometimes necessary if it's a fairly large radii or similar.

Posting guidelines faq731-376

http://eng-tips.com/market.cfm?

(probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484​

 

[beachcomber]

I draw lines in the view.
There is no automatic feature to do it.

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.

Where would we be without sat-nav?