Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Manway design. Clarification.

Status
Not open for further replies.

Jay_

Mechanical
Feb 20, 2019
99
Dear all,
Can anyone please tell me what kind of manway design is this, it’s a manway welded on a pressure vessel head.
Thank you.

2965ED0A-9F6E-4E1B-BE24-511F5B7A6E8E_yjzjd9.jpg


Detailing is a hobby,
 
Replies continue below

Recommended for you

Its a good thing that you only posted one photo .... multiple photos or measurements would be giving us way too much information...

Keep up the good work !!!


MJCronin
Sr. Process Engineer
 
I assumed somebody else would know.
The part welded into the vessel looks like a studded outlet flange.
The rest of it- don't know. Looks like a head welded to a flange with a handhole in the center. Or some type of instrument or heater port?
 
Or something...

The problem with sloppy work is that the supply FAR EXCEEDS the demand
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor