I am using Windows ME and when I try to customize my screen and I try to bring my mapkeys up under the command tab, it takes forever to bring them up. I have no problem on my other machines at work, but they are not running Win Me. But my 2 Win ME systems take forever. Any suggestions?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mapkeys??
- Thread starter bastolos
- Start date
I tried to run Pro-E on ME and it worked for a while but then strange stuff started happening and it would not work with more than two windows open. I have heard a lot of bad things about ME so I got rid of it and installed XP instead, Pro-E works fine on this. Do you know how to bring icons created outside Pro-e onto a toolbar?
- Thread starter
- #3
If you want to bring icons into ProE, you can only use the Copy/Paste functions available in the Toolbars. Since the icons are 20x20 pixels, create an Icon in any program, then Copy it and Paste it will in the Toolbars menus.
Steve
Steve
- Status
Similar threads
- Locked
- Question