Marine Shipboard Cable Termination Ampacity

[lsughost]

I am trying to determine what ampacity to use for Marine Shipboard Cable (Type P) on 75ºC terminations governed by NEC. Cable sizes larger than 4/0 are not found in NEC 310.15(B)(16) formally 310.16. They are similar to DLO such as 373, 444, 535, etc... Do I use the next smaller value found in the NEC table?

 

[wareagle]

This may help

http://www.summit.com/industries/ma...nd-cutting/Drilmar/Drilmar_SCPDC_TypeP600.pdf