Matcad calculation for IEC 60287

[NUgraad001]

Hi all,

kindly advise if you all have sample of IEC 60287 calculation by mathcad with several condition ( buried, duct and air ), please shared.
i need to learn how to calculate iec 287 by manual instead of using the software.

thanks in advance
regards

aditia

 

[7anoter4]

At first, as you probably know, IEC 60287 are actually 4 separate volumes. Usually we use
IEC 60287-1-1 connected with IEC 60287-2-1.I don’t know if a Mathcad file complete exists. I did, for my personal use ,several excel files for different cable run: in free air, underground-simply buried or in duct bank and so on. By doing so I learned much more than from inserting data in a software made by other without knowing all the conditions.
I use also Visual Basic 6 –for IEC 60287 and for Neher and McGrath- for cable in duct bank and open air.

 

[NUgraad001]

hi 7anoter4

very appreciate if you can share your file excel or the vb6, so i can learn about iec 60287 step by step...

thanks in advance

regards
aditia