davidrdguez
Mechanical
- Apr 24, 2010
- 59
Hi there,
I've been looking for the proper subforum for a while, I finally chose this one.
We have a bunch of cables which moves back and forth around a 250 mm diameter PVC tube. We built the setup and when moving there was much vibration due to the friction between the cables and the PVC tube.
In order to avoid this I wrapped the bunch of cables with a plastic supermarket bag! This solution is kind of botch. We also put some other plastics we found around such the typical red and which strips used to limit spaces like construction areas (which wasn't as good as the supermarket bag, even we discovered the difference between the red and white parts).
We want to do something more "professional", for that I would like to ask if you know any foil material we can use with a low friction coefficient against the PVC
Thank you
Regards,
David
I've been looking for the proper subforum for a while, I finally chose this one.
We have a bunch of cables which moves back and forth around a 250 mm diameter PVC tube. We built the setup and when moving there was much vibration due to the friction between the cables and the PVC tube.
In order to avoid this I wrapped the bunch of cables with a plastic supermarket bag! This solution is kind of botch. We also put some other plastics we found around such the typical red and which strips used to limit spaces like construction areas (which wasn't as good as the supermarket bag, even we discovered the difference between the red and white parts).
We want to do something more "professional", for that I would like to ask if you know any foil material we can use with a low friction coefficient against the PVC
Thank you
Regards,
David