Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Materials Selection for Water Injection Pipelines Offshore

Status
Not open for further replies.

sammy123buswell

Materials
Joined
Jan 24, 2011
Messages
1
Location
US
Can anyone advise on water injection pipeline material that Petrobras and Statoil have used? I know, that depending on confidence and availability of topsides processing to reduce oxygen levels, some operators will use carbon steel. However, many operators have had failures and as such prefer to use liners or CRA pipelines. I am not familiar with Petrobras or Statoils water injection lines and wonder if anyone can help me. Thanks
 
Material for water injection pipelines is CS+6mm CA with corrosion inhibition.Based company recommendation we can go for CS with FBE lining also.
No need to go for CRA option.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top