Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Math domain error while giving an analytical field

Status
Not open for further replies.
Naman Verma

Naman Verma

Student
Nov 12, 2021
12
I want to give an elliptical load at a surface and when I give the equation for the elliptical load it shows math domain error. Why is it so?
error_ntlpnc.jpg
 
Replies continue below

Recommended for you

Sort by date Sort by votes
The problem is most likely caused by the fact that this formula results in complex numbers for -1.16321 <= Z <= 1.16321
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jjvcjjvc
  • Question
unigraphics nx 2312: measure while in clip section
Replies
0
Views
473
jjvcjjvc
jjvcjjvc
sal21
  • Question
embedded region - error
Replies
0
Views
65
sal21
sal21
I
  • Question
Friction error in MSC Adams
Replies
5
Views
2K
GregLocock
GregLocock
lemslems
  • Locked
  • Question
Impact Loading Analysis in Abaqus Very Different From Analytical Solution
Replies
3
Views
84
FEA way
FEA way
S
Abaqus Element set Not defined error
Replies
1
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom