May 23, 2011 #1 Anapa Industrial May 23, 2011 2 0 0 US The parameters has been lost on Mazak VQC 20/40 B due to a dead battery. Machine turns on but the screen shows nothing, then after 3-4 minutes some parameters appears but keyboard does not work. How to restore the data? Any help will be appreciated.
The parameters has been lost on Mazak VQC 20/40 B due to a dead battery. Machine turns on but the screen shows nothing, then after 3-4 minutes some parameters appears but keyboard does not work. How to restore the data? Any help will be appreciated.
May 23, 2011 #2 MikeHalloran Mechanical Aug 29, 2003 14,450 0 0 US Here's a link to an old discussion that might be useful in sufficiently bizarre circumstances: http://www.practicalmachinist.com/vb/mazak/vqc-20-40-m2-lost-parameters-191603/ Mike Halloran Pembroke Pines, FL, USA Upvote 0 Downvote
Here's a link to an old discussion that might be useful in sufficiently bizarre circumstances: http://www.practicalmachinist.com/vb/mazak/vqc-20-40-m2-lost-parameters-191603/ Mike Halloran Pembroke Pines, FL, USA
May 23, 2011 Thread starter #3 Anapa Industrial May 23, 2011 2 0 0 US Thank you, Mike, but there is no useful info for my situation. Upvote 0 Downvote