I got flags of measure (distance of points to various lines etc.)and results in the tree, and this numbers needs to get out. I tried design table, it works, but for one moment...isnt parametrical...(
If you want to do with with a design table, you'll have to add parameters for each of the measurements. When you create the parameter, right-click in the value field (after the name field) and chose the Measure Between option.
Jackk,
its a good idea, I tried but it end with:..."Relation DesignTable.1 cannot be activated because on of its output is a referenced constraint".... the design teable comes into deactivated state after creation..(