That is strange. How did you create the cube? Did you enter the values 25.4, or did you dynamically drag an extrusion? Was the start point of the extrusion (if thats how you created it) at zero?
I'm doing this for a workmate. He doesn't have an account here. I create a cube the same way and it measures exactly 25.40000000000000.
We're using nx 9.0.2.5 and used block to create the cube. x=25.4 y=25.4 z=25.4 at absolute zero. I'm still thinking its in the preferences.
Maybe some kind of tolerance for modeling?
So you're saying that this is only showing up on one machine, not all of them? Are they all running the same versions of NX? If you're creating this model using the 'Block' feature, then Modeling Tolerance should have no impact whatsoever. You mention that you created YOUR model at absolute zero. Is your workmate doing the same thing, that is creating this BLOCK at absolute zero? And again, are you working in metric units? If this is a problem with one machine versus another, have you created a model on one system, saved it and then did the measurement on different machines? Were the results the same or different?
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA Siemens PLM: UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
