May 24, 2011 #1 petersi Automotive Feb 3, 2011 88 Is there a gauge to measure round corner "the r". I think I seem it somewhere but forgot the name?
May 24, 2011 #2 Kwan Aerospace Feb 11, 2005 252 radius gage? http://www.google.com/search?q=radi...GL4ubtweyk63LDw&ved=0CCoQsAQ&biw=1246&bih=676 Upvote 0 Downvote
May 24, 2011 #3 DennisP Mechanical Jul 3, 2001 40 Depending on the configuration of the part, an optical comparator might work. You could also use a CMM or a linear form tester such as the Zeiss Surfcom. Upvote 0 Downvote
Depending on the configuration of the part, an optical comparator might work. You could also use a CMM or a linear form tester such as the Zeiss Surfcom.
May 24, 2011 #4 racookpe1978 Nuclear Feb 1, 2007 5,984 How accurate do you want your value to be? Simple hand-held gage or precision recording device? How "portable" does it need to be? (In-pocket, bench-mounted, microscope-capable?) Check out the "fillet weld gauges" for a cheap effective analog device - they'd be less than 20.00 and fit in a shirt pocket. Upvote 0 Downvote
How accurate do you want your value to be? Simple hand-held gage or precision recording device? How "portable" does it need to be? (In-pocket, bench-mounted, microscope-capable?) Check out the "fillet weld gauges" for a cheap effective analog device - they'd be less than 20.00 and fit in a shirt pocket.
May 25, 2011 #5 Bobber1 Structural Oct 20, 2005 138 Get a drafting circle template and cut it up. Upvote 0 Downvote
