Measuring Wall Thickness 2

[Vikingbro]

Win XP Pro SP3
NX 6.0.3.6
Mach 3 Design Bundle
====================

Within the parameters listed above, is it possible to measure model wall thickness and have the results plotted on the model in varying colors based on the measured wall thickness?

If so, where do I find it and how do I do it?

If not, what do I need to perform this task?

I know that there is a display option within Face Analysis called ‘Fringe’ that will color the model based upon the measurement results. I just don't know if I can/how do I get these results for measuring wall thickness.

Many thanks!

Chris Cooper
Senior CAD Specialist
Cleveland Golf / Never Compromise

http://www.clevelandgolf.com

http://www.nevercompromise.com

 

[JohnRBaker]

Try going to...

Analysis -> Molded Part Advisor...

If you find this item AND you can select it without any warning message, then that should do what you need.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[Vikingbro]

John,

Once again, you are the master!

I believe this is what we are looking for. I have reported you answer to my user, and he is now trying to familiarize himself with the options.

Thanks again, and a shiny new star for you!


Chris Cooper
Senior CAD Specialist
Cleveland Golf / Never Compromise

http://www.clevelandgolf.com

http://www.nevercompromise.com