Mar 31, 2014 #1 cjmorse Mechanical Jan 22, 2014 2 0 0 US I'm looking for UTS and or Young's Modulus for an HDPE structural foam. Anyone have any ideas?
Mar 31, 2014 #2 Pud Mechanical Mar 26, 2003 2,675 0 36 GB Must depend on foam density, surely? Data from manufacturers for a specific product is probably your best bet. H www.tynevalleyplastics.co.uk It's ok to soar like an eagle, but weasels don't get sucked into jet engines. Upvote 0 Downvote
Must depend on foam density, surely? Data from manufacturers for a specific product is probably your best bet. H www.tynevalleyplastics.co.uk It's ok to soar like an eagle, but weasels don't get sucked into jet engines.
Mar 31, 2014 Thread starter #3 cjmorse Mechanical Jan 22, 2014 2 0 0 US True on both counts, however, the vendor has been slow to respond. I'm hoping I can find some general information at some standard density. I have seen information for Polyurethane foams at 20% reduction in density. Upvote 0 Downvote
True on both counts, however, the vendor has been slow to respond. I'm hoping I can find some general information at some standard density. I have seen information for Polyurethane foams at 20% reduction in density.