Medium / Small Carbon Plate Supplier?

[CoyoteBros]

I am looking for an alternate source for my Carbon Plate. I need consistent thicknesses and lay-ups to my spec. There is no chance I am going to do it myself….. so any good advise?


Thanks

JTH

 

[edrush]

http://www.composite-solutions.com/

Owner is extremely competent, and no, I don't get a commission (so hopefully I won't get reprimanded for this recomendation).

 

[CoyoteBros]

They look too big but if they will play with me that would be great! I'll tell them that "Ed sent me" and you may never be allowed in the building again

JTh

 

[edrush]

Everyone tries to look big to impress big customers. They are still on the small side in terms of people, although the shop is relatively large (they have made some big parts. Tell them Mr. Rush sent you. Chances are they will play with you.

 

[daleroe]

I have an aquaintence who built some ballistic prototypes for me. Nice guy, pays attention to detail. Well equipted shop with a large autoclave. He may also be able to do the machine work in house as well. You might want to give him a call.

All-Composite Inc
3206 232ND St E
Spanaway, WA 98387
(253) 847-5106
Ludwig Hiemrath