Memory access vialoation, keeping me from adding a parts list.

[TACKS652]

How can I fix this issue. Have completed a parts clean up on the assembly file and all loaded parts. Thanks is advance.

 

[MBrookey]

So when you add your parts list you get this error?

I'm not sure what version your on but I know I used to get that error. I know this is going to sound stupid but give it a try.

After you do the clean up save and exit. Then bring ug and under costomer defaults -->gerenral -->undo (tab)change the undo file size to 4057.
I know this fixed my problem after talking to Gtac

Then bring you parts up and try your parts list again..

Are you using a template parts list. Or are you importing one as a part to a drafting sheet?

 

[TACKS652]

Version is NX3. I am getting the error when I try to add my cusotm parts list template to a drawing sheet. Will try the above and see what happens. The undo size of 4057 sounds familar from many years ago. Will keep you posted.

 

[looslib]

Are you on the latest MP of NX3?

"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
Sr IS Technologist
L-3 Communications

 

[MBrookey]

TACKS652

Something else you could try that works well for me is open a drawing that has your BOM on it already and export a part pick the BOM to be exported. Then in the file you are trying to creat it in import that part containing the BOM.

This is how I always creat my BOM. I've had less errors this way.