Mesh failed

[Mr_Curious]

Hello everyone.

I have no idea how to create the mesh on my model.

I've tried to create it by default and with some face sizing adjustment on tiny faces, also i've tried with different values of Element size from 85 to 40.

I've checked mistakes by Fault Detection in Design Modeler and repaired it by Virtual Topology in Mechanical but have got no result.

The errors that were shown are below.

Also, i have attached my Design Modeler file .agbd below (Ansys 2020 R1).

My model was created as one part, so you dont need to create connections. I couldn't share workbench project archive due to the size is more than 4 GB.


Help me please!!!

 

[mskds545]

I don't know if it's contributing to your problem, but your physics preference is set to CFD and it looks as if you are meshing a solid structure.

-mskds545

 

[Mr_Curious]

mskds545, yes its because i've tried to create the mesh in various structures

 

[Mr_Curious]

Problem has been solved by repairing dirty geomerty.