Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
metal removal formulas
- Thread starter JimRa
- Start date
hi,
the best thing i can recommend to you is too investigate the Machinery's hankbook this contains general guides to cutting speeds and feeds isbn no#0-8311-1155-0 for most metal forming/machining proceesses if you have an oddball material to machine refer back to the tool manufacturer.
the best thing i can recommend to you is too investigate the Machinery's hankbook this contains general guides to cutting speeds and feeds isbn no#0-8311-1155-0 for most metal forming/machining proceesses if you have an oddball material to machine refer back to the tool manufacturer.
Go to they have some software that will do the trick .It is called TEC it will give you feeds and speeds .
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question