Methane Gas Burner from valve

[K79]

Dear All,

for this next 2 months, im planning to build a methane gas burner. The burner head I planned to made is a 60mm dia. used modified Valve+ tube+ welding gas injector. and it will be assembled.

Is there anyone have doing it also?

kindly please share information..

Regards,

K79

 

[btrueblood]

Igniting the flame without blowing yourself up will be a challenge. The flame will want to stabilize behind the step along the wall, but weakly. Try putting a flameholder along the injection tube.