Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

.mf1 I-DEAS 11 File to open in I-DEAS 12

Status
Not open for further replies.

aniledupuganti

Mechanical
Mar 13, 2011
5
Hi I am facing the following problem while opening an I-DEAS 11 .MF1 file in I-DEAS 12.

I also have the .mf2 file.
An error message is coming when i try to open it in I-DEAS 12.
My I-DEAS 12 & I-DEAS 11 are in different systems.

It is stating
"I-DEAS cannot access the data.The file has a format that is not compatible with current hardware platform."

Can somebody please help me out to find the real problem.

Regards,
Anil
 
Replies continue below

Recommended for you

In the different system are you using the same login? Also are going from unix to windows?
 
hi SDETERS,
I am using a different logins.
& no both are Windows systems.....

Regards,
Anil
 
Hi aniledupuganti

You shouldn't be moving model files that way. Model files are only to work. If you update your I-deas version you should check in all the information to the manage libraries, delete all the model files, do the migration and then check out the parts again in the new version

I recomend that you open your model file in I-deas 11 and check everything in or, at least, to export the parts or assemblyes with a *.pkg file and open a new model file in I-deas 11.

regards
 
Try using the same login. You should have done what Nibola suggested. I am guessing it is to late. You need to log in as the same user would give you the best chance to open this model file.
 
Hi all,

Thanks for the help.
The version seems to be the problem.
Now the problem is solved.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor