Millturn with xyzc UG Cartesian Coordinate Post-processor

[davidtan20]

I was trying to make DMG Millturn with XYZC UG Post, I have did
1) 3-Axis mill-turn(xzc)
2) Initial axies Z
3) click Cartesian as Default Coordinate Mode and Circular Record Mode
post result get -x coordination, Millturn is not suppose to have "-" X coordinate, how can get rid of this ?
or do I need to choose 4-axis with rotary table, how can I keep "+" X coordiate ?

I have tried "word summary" ==> X ==> changed minmum -9999.000 to "0", wouldn't work.
anyone can help me ?

following program is about a pocket on Z face.

%000.NC
N0010 G40 G17 G70
N0020 G0 G14 Q0
N0030 T16
N0050 G110 G197 X.2153 Y.1515 C0.0 S5000 M03
N0060 G110 Z.05
N0070 G111 G195 Z-.09 F30. M08
N0080 G41 G111 X.25 Y.25 D16
N0090 G17 G113 X0.0 Y.375 R.125
N0100 G111 X-.6
N0110 G113 X-.75 Y.3 R.075
N0120 G111 Y-.3
N0130 G113 X-.6 Y-.375
N0140 G111 X.6
N0150 G113 X.75 Y-.3
N0160 G111 Y.3
N0170 G113 X.6 Y.375
N0180 G111 X0.0
N0190 G113 X-.25 Y.25 R.125
N0200 G40
N0210 G111 X-.2153 Y.1515
N0220 G111 Z.05
N0230 M105 M109
N0240 G0 G14 Q0
N0250 M30
ENDE [ END ]

 

[davidtan20]

xk yk will do !