Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

miter joints

Status
Not open for further replies.
dman25

dman25

Materials
Jun 17, 2008
5
I have been trying to find information on miter joints. CFR 192.233 only allows up to 3 degree miter joints but can't locate any info as to why they are not allowed. Can someone explain why not?
 
Status
Not open for further replies.

Similar threads

W1987
  • Question
Question about weld fillet reinforcement in PJP or CJP joints
Replies
2
Views
2K
SJones
SJones
trolex
  • Locked
  • Question
Several type of joints using just one WPS 1
Replies
7
Views
1K
Maria Garcia
Maria Garcia
RInspection
  • Locked
  • Question
AWS D1.1 (2010) Prohibited Joints
Replies
3
Views
590
gtaw
gtaw
Salmet
  • Locked
  • Question
Radiography of Rectengular Butt joints in over head cranes as per AWS D1.1
Replies
1
Views
91
Mr168
Mr168
Eck75
  • Locked
  • Question
Minimum distance between two butt joints plate 2.5" thick for steel st
Replies
1
Views
127
GRoberts
GRoberts

Part and Inventory Search

Sponsor

Back
Top Bottom